Learning Center Archive - Page 11 of 106

Sweating AC Vents, Condensation & Mold Remediation My AC Vent Is Sweating and Now There Is Mold on the Ceiling in My Englewood, FL Home. What Do I Do?

Do I Need Mold Testing Around a Sweating Vent? Not automatically. Visible conditions, moisture readings and investigation of the condensation source may answer the practical questions. Testing is useful when it answers a specific need or formal assessment is required. Can Mold Around One Sweating Vent Mean Whole-House Mold? No. A localized condensation problem does […]

Read Article

Roof Leaks, Ceiling Mold & Hidden Water Damage My Roofer Fixed the Leak in Palmetto, FL. How Do I Know Whether the Interior Needs Mold Remediation?

Should I Photograph Interior Damage Before Opening the Ceiling? Yes. Photograph stains, swelling, mold, affected walls and contents before conditions change. What If the Roof Leak Happened Months Ago and Was Just Repaired? Long-duration or repeated wetting increases concern for concealed damage. Materials can appear dry today while contamination from prior wet periods remains. What […]

Read Article

Kitchen Mold Remediation There Is Mold Behind My Kitchen Cabinet in Ellenton, FL. How Much Drywall Has to Come Out?

Why Is Mold Under Kitchen Cabinets a Common Hidden Problem in Ellenton? Ellenton includes single-family homes, subdivisions, older properties and rentals. Kitchen plumbing and appliances can leak slowly behind finished surfaces. By the time mold appears at a toe kick or cabinet edge, water may have traveled beneath the cabinet, into drywall, along the wall […]

Read Article

I found mold in my house in Sarasota. What should I do?

Water Damage & Structural Drying My Plumber Fixed the Leak in Lakewood Ranch, FL, but the Wall Is Still Wet. What Do I Do?

Why Can a Fixed Plumbing Leak Still Leave Water Damage in Lakewood Ranch? Lakewood Ranch includes new construction, large homes, second homes and condos. Water can travel behind drywall, under flooring, beneath cabinets and into insulation or framing before the plumber arrives. Once the source is repaired, that trapped moisture does not disappear automatically. Does […]

Read Article

Bathroom Mold, Shower & Tub Remediation There Is Mold Beside My Shower in Manatee County, FL. Does the 2-Foot Rule Mean the Shower Has to Come Out?

Can Mold Behind Drywall Be Remediated Without Removing Tile? Sometimes. If the contaminated drywall and framing can be accessed from the opposite side, the tile assembly may remain undisturbed. Can the Shower Tile Be Saved if Access Is Required? Sometimes. The best access route depends on wall construction, tile layout and contamination location. Preserving expensive […]

Read Article

Water Damage & Mold I Had a Water Leak in My Englewood, FL Home. Do I Possibly Have Mold?

Why Can Water-Leak Mold Risk Be Different in Englewood? Englewood includes coastal homes, seasonal residences and older Florida homes. A sudden supply-line break discovered immediately is very different from a slow refrigerator line, roof leak, condensate problem or plumbing leak hidden behind a cabinet. The duration and drying conditions matter more than the size of […]

Read Article

Water Damage & Structural Drying What Happens During Professional Water Damage Mitigation?

And it isn't: "Put fans everywhere." The objective is: Control the loss. Determine what actually got wet. Save what can reasonably be saved. Remove what cannot be restored. Dry the remaining structure. Document the process. What Is Water Damage Mitigation? Water damage mitigation is the work performed to limit additional damage after a water loss […]

Read Article

Rain-Only Wall Leaks, Exterior Intrusion & Hidden Mold A Wall in My Longboat Key, FL Home Gets Wet Only When It Rains. How Do I Find Where the Water Is Coming From?

Can a Sliding Glass Door Cause a Nearby Wall to Get Wet? Yes. Threshold, flashing, sealant and adjacent wall details can allow water into flooring or lower-wall assemblies. Can Roof-to-Wall Flashing Cause a Rain-Only Wall Leak? Yes. Flashing and roof/wall transitions can allow water to enter high in the assembly and migrate down a wall. […]

Read Article

Mold Discovery, Assessment & First Steps I Was Told There Is Mold in My Palmetto, FL Home. Do I Call a Mold Assessor or Remediation Company First?

What If the Mold Is in a Closet? Closets can develop mold from high humidity and poor air circulation, especially when packed tightly or located on exterior walls. A hidden moisture source should still be evaluated. What If the Mold Is Around an Air Handler? The source could involve condensate, sweating equipment, poor ventilation, trapped […]

Read Article

Ceiling Mold, Roof Leaks & HVAC Condensation There Is Mold on My Ceiling in Manatee County, FL. Do I Call a Roofer or an HVAC Company?

Can I Paint Over the Mold Spot? No. The moisture source should be corrected and affected material appropriately cleaned or remediated before repainting. What Does ServiceMaster SRQ Use During Structural Mold Remediation? ServiceMaster SRQ uses physical cleaning and Serum 1000/1K for appropriate structural mold-remediation applications. Bioesque Botanical Disinfectant Solution may be used in appropriate labeled […]

Read Article

Ceiling Mold, Roof Leaks, HVAC Condensation & Humidity I Found Mold on My Ceiling in My Englewood, FL Home. Is It a Roof Leak, AC Problem, or High Humidity?

Can I Just Paint Over the Ceiling Mold? No. Correct the moisture condition and appropriately clean or remediate affected materials before cosmetic repair. What Does ServiceMaster SRQ Use During Structural Mold Remediation? ServiceMaster SRQ uses physical cleaning and Serum 1000/1K for appropriate structural mold-remediation applications. Bioesque Botanical Disinfectant Solution may be used in appropriate labeled […]

Read Article

Air-Handler Closet Mold, Ventilation & HVAC Moisture There Is Mold Around My Air Handler on Anna Maria, FL. Is the AC Closet Too Humid?

Can Bioesque Be Used During HVAC-Related Mold Remediation? ServiceMaster SRQ may use Bioesque Botanical Disinfectant Solution in appropriate labeled applications. Product use supports cleaning but does not replace physical removal or correction of the moisture source. What Does ServiceMaster SRQ Use on Structural Mold Around an Air Handler? ServiceMaster SRQ uses physical cleaning and Serum […]

Read Article